+ Reply to Thread
Results 1 to 9 of 9

Thread: help!

Hybrid View

  1. 06-24-2012 12:29 PM #1
    low_life96's Avatar
    low_life96
    low_life96 is offline Senior Member
    Join Date
    Feb 2008
    Location
    Stigler,ok
    Posts
    124
    Na i have to harness out of an 01 truck an the connectors at the throttle body are different my tthrottle body his tp sensor ad idel air sensor connectors an the other harness i have just has one big connector an its also out of an 01 truck
    Reply With Quote Reply With Quote
  2. 06-24-2012 02:49 PM #2
    ecld_07
    ecld_07 is offline Big dreams small pockets
    Join Date
    Dec 2007
    Location
    Ponca City
    Posts
    1,606
    Pics? Sounds like tb is wrong
    Slowest in Oklahoma...
    Reply With Quote Reply With Quote
  3. 06-24-2012 09:49 PM #3
    GasGuzzler's Avatar
    GasGuzzler
    GasGuzzler is offline Pants on the ground
    Join Date
    Aug 2008
    Location
    North Texas
    Posts
    12,078
    Not sure of the use of the word "track" but the original DBW throttles had two plugs due to the external TPS the newer ones don't have. The old ones have a two wire pigtail for motor control of the blade and a three wire pigtail for the TPS. Trouble is, the newer ones with the internal TPS have two TPS built in so there are two signal wires, a low reference wire, a 5V reference wire, two motor control wires. You can reconfigure one to work with the other but since the PCM's are different (I think), you really need to know what you're doing AND have access to all the information (schematics, etc.) and know how to use the information.
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules