I am getting ready to put my engine in, its a 5.3. i have reworked the heads, new cam cam bearings, rods and lifters, almost ready to put it all back together and start it for the first time. what oil do you guys recommend to use? for break in as well as from now on.
2000 Z71 scsb 6in lift, 35s, 4.10s, flowmaster, cold air intake
1972 4x4 chevy shortbed 7in lift, 36s, cammed 5.3, built 65e...in progress
Royal Purple-because it's expensive and pretty!
Nah, just run dino oil. I use Castol 10w-40 because I always have and never had any problems with it.
Rotella t 15w40
DUH this is a no brainer. Mobil 1 with mobil 1 filter. I denyed my first complimentary oil change on my 2012 because they wanted to put that dextron shit in my truck.
there is not much zink left in rotella, if any. 5 years ago i would have agreed but to much detergent in it nowOriginally Posted by Quik
74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast
Wix filter...
Generic 5w-30 conventional oil with a zinc additive for the first two oil changes. Mobil 1 after that. I prefer wix for a filter.
Valvoline VR1 racing oil, it has the additives that the engine needs for start up. Its a good oil to continue using also. The Rotella doesn't have any additives anymore as Luke stated.
Mobile 1 or Royal Purple if you just won the lottery.
2006 CCSB 5.3 Calspeed LT, CAI, Nelson tuned, 3'' exhaust
Posting Permissions
Reply With Quote
