+ Reply to Thread
Results 1 to 10 of 19

Thread: Viper Alarm Install - Need some pointers

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    wichita falls, tx
    Posts
    613
    I believe on a viper system it should be able to trigger your door looks straight out of the brain of the alarm. AS far as the truck Almost starting it is your VATS (Vehicle Anti Theft System) kicking in because it is not seeing the electrical resistance of the key cylinder being turned with a key in it and it is shutting off the fuel pump.

    Here is how to disable that.



    AS far as the door locks what wires are you tapping into and where are they located?

    Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
    EPS cam 23x/23x 600/603 112lsa
    KP 6 link bagged with Accuair E-Level
    http://www.nitrousexpress.com/

  2. #2
    Join Date
    Mar 2011
    Location
    Amarillo TX
    Posts
    199
    Ok, I got everything sorted out.

    The guy that fixed me up said that I had everything right, I just hadn't bypassed the VATS (as mentioned above) and the door locks were trying to trigger on a negative charge instead of a positive one. He swapped out my bypass module for one that was set up with the right door lock configuration. Not sure what kind it is, but apparently the other bypass module that I picked up was less specific to my truck year and model, and to make it work I would have had to run a pair of relays (one for each door).

    Thanks again to those who helped out, glad to be done with it.

    Now I'm going to start shopping for a new audio setup!
    2000 ECSB 5.3L with K&N CAI, true duals with flowmaster 40s, and 200k miles!

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts