Quote Originally Posted by RPM Graphics View Post
yea me!!!!! i found the pin out for the main firewall plug, C100 connector. should make things go a little easier.




now i just need to figure out what stays & what can be removed. also still need to find out about the other plug on the passenger side which really isn't a plug, it's a weather tight grommet.


some of the ones in the pin out above don't match my plug.
i also found this one but it's missing some of row D & all of row E. some of those match on mine but some don't.
could you tell me which one of the wires you used for the speedometer on the dash? there is too many "vehicle speed sensor" or "VSS signal" to know which one is which.. also, what wire did you use for the OBD2 port? " i need serial data but it looks like it "tees" off into two wires, One running into the weathertight plug on the passenger side. And Does the TCC wire go to the ABS module connectors as well?