Shouldn't need any other parts, just need a power steering pulley remover/installer tool to swap the pulley over.
Shouldn't need any other parts, just need a power steering pulley remover/installer tool to swap the pulley over.
2000 Chevy Silverado RCSB LS6 5 speed, LS6 short block, 317 heads, LS6 intake, Lunati 220/224 .575/.575 112LSA cam, Edelbrock Headers, CTS-V accessory drive, Nelson Performance Custom Tune.
Good luck getting the pulley back on. They need to be pressed on. But good news is you can take the whole pump out without taking the pulley off. I would try getting a pump that comes with a pulley for ease of swap.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
How did you take the pump off without removing the pulley??? The bolts on mine are behind the pulley. My stock pump made noise every now and then, got two pumps from oriellys and they made noise all the freaking time! Ended up putting stock pump back on.
The Fleet...
2003 Suburban- 5.4 L59 331CI 10:5.1 Compression -Built by ME
2004 Avalanche- 5.7 LS1 -NOT built by me
2005 Silverado RCSB- 5.7 LS6 -Built by ME
Posting Permissions
Reply With Quote