If you need ignition from the key/switch; simply cut a wire and but connect them together, or whatever is recommended.
Now when you turn key to ON, you will have IGN.
If you need ignition from the key/switch; simply cut a wire and but connect them together, or whatever is recommended.
Now when you turn key to ON, you will have IGN.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
OK I will just splice into a wire that has 12v going up my column towards the key. But what gets me is the key already has 12v going to it from original harness, But I am now sending 12v from my 04 fuse box too?
Posting Permissions
Reply With Quote