Get the sbc to ls1 dirty dingo mounts, then get some V8 motor mounts for ur body body style for the dingo mounts to bolt on to
Get the sbc to ls1 dirty dingo mounts, then get some V8 motor mounts for ur body body style for the dingo mounts to bolt on to
1989 RCSS 5.3/4L60E swap
- 224/230 .581.591 112lsa,
- 3200 Stall
- DJM 4/6 drop
- Nelson Tuned
Building the truck GM never did..
The dirty dingo mounts to the v8 frame mounts.You don't need the cups that bolt to the sbc motor.The arrows on the dirty dingo mounts point towards the front of the motor.On mine from the back of the motor where the bellhousing bolts to the back of the dingo mount where it bolts to the frame mount measurement was 14 in.I hope that helps.
Posting Permissions
Reply With Quote