+ Reply to Thread
Results 1 to 2 of 2

Thread: fueling a lq9 in obs

  1. #1
    Join Date
    Dec 2011
    Location
    hastings, mn
    Posts
    49

    fueling a lq9 in obs

    Ok so I'm in the process of getting this swap going in my 94, I'm getting a fuel cell made for the truck and already have the pump ring made for a 99-06 fuel pump. I have been ordering parts like friggin crazy and comes to the fuel system so my question is what is the best option to fuel an 05 lq9 with stand alone harness into my 94. Can I run a fuel pump out of an 05 SS or am I better off to go with the walbro in tank, seems as if most are doing the electric pump, what would be the pros and cons of using either an oem pump vs. The electric pump?? I'm am trying to avoid buying stuff twice so want to get is correct the first time around.

  2. #2
    Join Date
    Jun 2009
    Location
    Caledonia, MI
    Posts
    322
    Quote Originally Posted by 1low94 View Post
    Ok so I'm in the process of getting this swap going in my 94, I'm getting a fuel cell made for the truck and already have the pump ring made for a 99-06 fuel pump. I have been ordering parts like friggin crazy and comes to the fuel system so my question is what is the best option to fuel an 05 lq9 with stand alone harness into my 94. Can I run a fuel pump out of an 05 SS or am I better off to go with the walbro in tank, seems as if most are doing the electric pump, what would be the pros and cons of using either an oem pump vs. The electric pump?? I'm am trying to avoid buying stuff twice so want to get is correct the first time around.
    I went with walbro 255 in my 94. Very easy. Read my thread for the part numbers/the kit the make for easy wire hookup
    Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts