Heads?

[Frenchy]

I'm too lazy and tired to go through your links, but dollar for dollar it's hard as hell to beat the offerings from PRC.

[daddy's_playing_again]

If your looking at the dart's really check into them. The 700-900 price tag is prolly per head and 1400-1800 for a set there are several really good heads out there! I went directly to dart's website, and I couldn't find an LS head offered. So be careful!!!

[daddy's_playing_again]

I was asking about heads earlier this moening, and skeet suggested i go with the 2.5 5.3 heads for the money over trick flow's.

http://www.texas-speed.com/p-1172-pr...ted-heads.aspx

[darnie1987]

dang good catch... ya i didnt know that and yea i think my fav choice is the prc 2.5 heads but thats about the max i could scramble up dude to housing and job crap...
bout the best i found with Dart

http://www.dartheads.com/products/cy...der-heads.html

If your looking at the dart's really check into them. The 700-900 price tag is prolly per head and 1400-1800 for a set there are several really good heads out there! I went directly to dart's website, and I couldn't find an LS head offered. So be careful!!!

[daddy's_playing_again]

yea, those are good heads, but not for a LS. those are conventional 23* heads. The newer LS heads are a 15* head. I think i'm going to go with the trick flow's. thet are a 13* head and flow just a touch more (but not much).

[darnie1987]

ya i think my safest bet is to buck up and buy the Prc heads... there alittle pricey but offer nice gains

[cjriojas]

darnie, have you read this yet?
http://www.ls1truck.com/forums/perfo...lowcharts.html

[darnie1987]

no sir, sure havent... il ltry and take a look at em tonight when i got some more time, thanks CJ