+ Reply to Thread
Results 1 to 10 of 144

Thread: project "GoNDown"

Hybrid View

  1. #1
    Join Date
    Sep 2011
    Location
    Atlanta Ga
    Posts
    692
    Remove abs?? But why?

  2. #2
    to clean up under the hood & i don't feel i really need it. if i remember right, my 88 didn't have ABS & my 92 only had rear ABS & i never had any problems stopping or anything with them.

  3. #3
    pulled the trans cross-member & notched it for my exhaust.


    & picked up an overflow tank.


    should have my ECU mount finished tomorrow & hopefully make some progress this weekend.

  4. #4
    Join Date
    Jan 2007
    Location
    Lewisville,TX
    Posts
    94
    Man it looks great in there! I always liked your truck and that bumper. Lots of good info for me on your thread. Give us more pics of anything and what u cut out of the factory wiring. I'm deleting my abs as well.

  5. #5
    Join Date
    May 2008
    Location
    wichita falls, tx
    Posts
    613
    Where did you get that over flow tank from?

    Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
    EPS cam 23x/23x 600/603 112lsa
    KP 6 link bagged with Accuair E-Level
    http://www.nitrousexpress.com/

  6. #6
    Quote Originally Posted by dimebagged View Post
    Man it looks great in there! I always liked your truck and that bumper. Lots of good info for me on your thread. Give us more pics of anything and what u cut out of the factory wiring. I'm deleting my abs as well.
    thanks man, it's taking me long enough, LOL!!!!
    on the truck harness i basically removed everything that went to the truck ECU, injectors, o2 sensors, egr, etc.....
    i left a few wires for the a/c. then i had to sort through all the wires that go into the c100 connector on the firewall & figure what goes where, oil pressure, temp, speedo, tach, check engine light, etc....
    it's very time consuming, but with the right diagrams it's, not too bad. what year is your truck? i have the diagrams for 96-98, which are different. i found out the hard way. my truck is a 96 & the first harness i got was for a 98. i didn't realize they were different till i had it all striped down, but i just consider it i learning experience, LOL!!!!
    LMK if you have any questions. i'm by no means an expert, but i've figured a lot of this stuff out.

    Quote Originally Posted by dropem View Post
    Where did you get that over flow tank from?
    ebay. it was like $35 or so. they have some that look identical that where $100-$200, but this one works fine so far.

  7. #7
    Join Date
    May 2008
    Location
    wichita falls, tx
    Posts
    613
    Do you have any pictures of it installed and how you routed the coolant lines?

    Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
    EPS cam 23x/23x 600/603 112lsa
    KP 6 link bagged with Accuair E-Level
    http://www.nitrousexpress.com/

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts