most likely need f-body oil pan to go with xmember your using
most likely need f-body oil pan to go with xmember your using
yea nathan said i will need one because the truck pan will hit the rack/pinion.Originally Posted by jeremys14
anybody have any input on the cruise control?
i'm pretty sure there's a write up some where on here about cruise control.
i have the cruise control off my truck & the one from the camaro if you want one.
i have the cruise that came with the motor. thanks for the link ray
Kelly what gauges do you plan to run if autometer I have all the info on what senders need to be used also I can help you out with fuel line set up if your using fuel cell I ran all stainless steel 3/8 fuel line with flex hose and -an style fittings I'm running the walbro 255 external pump .also there is a guy in baton rouge who did my computer flash for 85 bucks and will stand behind his work Nelson performance harness is the way to go get the extra three feet of trunk on the harness to mount computer and fuses and stuff with the harness inside the cab I am willing to help you wire it up if you need to I would get a painless harness are something similar to run everything else like I have and use the Nelson to tap into that
im not sure what guages im using just yet. thanks for the heads up on the computer flash and i will def take you up on the help man. as soon as i am able to go back to work i am gonna start ordering parts and a nelson harness is top of the list.
Also get new waterpump and thermostat if your not running heater are a/c get a loop and bypass the in and out on the waterpump
not to hijack the thread but would you mind sharing the info on autometer gauges, i hve a 66 chevy that i "may" use autometer or the stock gauges if possible. Also how do you like your walbro pump - would that be a reasonable choice for a stock lm7? Sorry I am still learning..
Posting Permissions
Reply With Quote
