Wtb 9.5" 14 bolt 6 lug

[George C]

I hear ya but don't have the coin for a 9". Might even have to build the 10 bolt if I can't find one or it's too much. What's good price for used one?

if you resort to using a 14bolt use one from a GMT400 truck. axles are more available. just have someone move the perches

i paid 1400 for mine back in 06 had 1k miles on it


Find a 9" from a junk yard for 50-100 bucks. then upgrade the parts. You might get lucky and find a fullsize ford that has similar width as your truck. this might be best route, you can also get a backbone brace cheap as well. If you can weld youre golden. Its possible you could have less then 1000 into it. [depending on how you go about this]

[DBRODS]

Dutchman makes replacement axles for the 14bolts.. Been running some in the TBSS for a while now.. Good parts

[George C]

do they have them for the truck ones thou? i was able to find axles for every version but the 05-06 rear

Dutchman makes replacement axles for the 14bolts.. Been running some in the TBSS for a while now.. Good parts

[DBRODS]

do they have them for the truck ones thou? i was able to find axles for every version but the 05-06 rear

Spline is still 33 and they can make whatever length you need..