<div class='quotetop'>QUOTE(NITROUS @ Mar 22 2006, 10:45 PM) [snapback]47896[/snapback]</div>From what I see in the picture, the tabs in the poly mounts are angled wrong. That motor should drop right in without having to grind on anything. You should be able to loosen the polymounts and the notches on the motor mount brackets should slide right on top of the poly tabs. Did the poly mounts come with the casings or did you use the factory one's? Looks like the poly inserts themselves need to be turned 180 degrees by the looks of the pictures.
[/b]
Well, it was a PITA to change them, and now I get to do it again. I thought you might be right, but it ended up making the top tabs closer together, and the lowers further apart.
Who ever thought putting in a motor would be this hard.
Reply With Quote