Get your self a test light touch one pin in the factory harness at a time with the key on when it lights up turn the key off if it goes off then there is your switched output make sure to ground the test light real good on something under the dash are door jamb
Last edited by Groundedbigbody; 01-18-2012 at 09:50 PM. Reason: Spelling
Go to the ignition harness and check the Pink wire for switched 12V, it should be good to go.
TVS=
Win! Thank you.Originally Posted by sully
R.I.P Blue '02
'08 - 5.3
Vette Servo, Flowmaster 40
Posting Permissions
Reply With Quote