here is some good swap parts.

http://www.brphotrods.com/mm5/mercha...ory_Code=CNV11

Yeah i was figuring a good mast or texas speed vvt cam. I was asking about the converter because since it's out you could put in a nice 26-2800 to help get everything moving.
Do you have plans on beefing up your rear end? I know the 6.2L trucks like mine, come from the factory with 14bolt rears and 33spline axels. That motor will be pushing some good power to get that truck scooting and the trans is very beefy and is sure to put some good strain on that 10bolt. It would be a good idea to look into some good gears and locker.

Take lots of pictures and keep us updated!