Will I need to do anything with the flywheel out of a 6.0 that was a 2wd if I am planning on putting it with a 4l80e thats for 4wd?
Is there a difference between the 2wd and 4wd flywheels is basically what Im asking lol
Will I need to do anything with the flywheel out of a 6.0 that was a 2wd if I am planning on putting it with a 4l80e thats for 4wd?
Is there a difference between the 2wd and 4wd flywheels is basically what Im asking lol
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
Don't think so
Slowest in Oklahoma...
The flexplate for a 2wd and 4wd are the same as long as they are both 80e transmissions.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Thanks for the quick response! What about using the computer from the 2wd truck. Can I use that with my 4x4 4l80e? Or do I need a comp out of a 4wd truck
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
what year ecm is it and what year harness are you using?
IF they are similar, then YES, you can use it. 4wd doesn't make any difference.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
They are all out of a 2005 2wd- The harness, ecm, and motor, its all from the same truck but i plan on puttin it in my truck with 4wd. Im going to attempt to splice the 2 together, and when that fails im callin nelson to order their harness LOL
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
yes, it'll all work!
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Posting Permissions
Reply With Quote
