yes, we did the exact same truck with dual tanks and working selector valve.
yes, we did the exact same truck with dual tanks and working selector valve.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
awesome! thanks so much... that take care of one issue
Guess it works. I wouldn't have guessed it would suck well enough through the valve all the way to the tanks. I'm running two tanks, and putting two pumps per tank. The stock selector valve is not strong enough for that fuel pressure, but the aftermarket version is (up to 70 psi or something). Also, with two pumps, if one happens to fail, you do have another. Also, intake pumps are somewhat quieter.
Which aftermarket selector vavle are you useing?Originally Posted by dothedew
yes please detail your setup.... i will possibly be turboing this thing in the future.... so i will need a better setup...
I'm doing an LQ4 swap in my 86. Got rid of the second tank and also ran a 255 in line Walbro. What are you doing for a vent line?
04 Z-71 ECSB, Leveling Kit, DC Mud Country 33'', JBA Shorties & Super 40 Flowmaster, PPI, JL Audio & Alpine audio with I-pod
do you have a return line? for vent i have in the past just put on rubber hose with a small inline fuel filter on the end.. keeps dirt and debris out but lets the tank vent... dont see why this wont work for ya...
I like that idea! Was going to run a vent line all the way to the old charcoal can. This is much easier and works well. Thanks. I am using the Corvette filter/reg. so I am not running a return back to the tank
Can you please let us know more details of your setup? pumps,valve etc.. thanks!
Walbro 255 intank pump. and high pressure switching valve
http://www.jcwhitney.com/motor-drive.../p2005712.jcwx
corvette regulator and filter combo
Posting Permissions
Reply With Quote