project "GoNDown"

[RPM Graphics]

my friend just dropped off my intake.

[myzterray]

my friend just dropped off my intake.

loos like candy! i was thinking about going with a car intake but i heard the truck intake gives you more low end torque. i like low end torque!! those pinouts up there saved my ass last night man!! i went through the 96 harness and removed everything i didnt need. then using wayoung post i elimnated the stock pcm..wish me luck!

[RPM Graphics]

yeah, know where everything goes into the firewall is a big help. the wiring has definitely been he biggest headache of the whole swap, that & getting friends over to help, LOL!!!

[myzterray]

yeah, know where everything goes into the firewall is a big help. the wiring has definitely been he biggest headache of the whole swap, that & getting friends over to help, LOL!!!

yea i wish i knew what the wire on the other side go to. the one with the firewall grommet. after i cut off everything i got 4 or 5 wires comin from there that dont go anywhere. lucky u got freinds to come help..ive done everything so far by myself.

[RPM Graphics]

yeah, i have about 6 wires that i cut that go into the grommet, yellow, purple, tan, white, green, & black w/ white stripe. they went to the ECU so i'm thinking they were just for data.

[myzterray]

yeah, i have about 6 wires that i cut that go into the grommet, yellow, purple, tan, white, green, & black w/ white stripe. they went to the ECU so i'm thinking they were just for data.

oh ok cool. i didnt have that many. yellow white green black or something idk. im going to plug everything up tomorrow and cross my fingers lol

[RPM Graphics]

firewall is done.