my first ls swap 1996 2 door Tahoe 4wd 385 Stroker to LQ4 cam headers **pics**

[myzterray]

If it takes an impact you are doing it wrong. The pulley has a flange on it the same diam as the bolt hole. Dont push on it thinking you are pushing on the crank. I put a 3/8 extension in the bolthole and then push against it.

no im trying to just get that bolt in the middle off.

[RPM Graphics]

may be a dumb question, but is it reverse thread?

[myzterray]

may be a dumb question, but is it reverse thread?

i dont kno.,,but i snapped 2 socket wrenches trying to loosen it

[RPM Graphics]

doesn't say anything about reverse threads but does say you may need an extender bar for more leverage & a puller to get it off.

http://www.ebbsnflows.cz28.com/photo4.html

[myzterray]

doesn't say anything about reverse threads but does say you may need an extender bar for more leverage & a puller to get it off.

http://www.ebbsnflows.cz28.com/photo4.html

yea i know about the puller just that bolt was kickin my arse! i will try again today with the jack handle!