2500hd, to drop or not to drop...

[CHEVROLADE]

slam it man them big trucks look badass slammed

[Slammed96]

+1 Slammed trucks are always a win

[bangbangskeetskeet]

Reason it looks higher than a normal 2wd is because its an HD. They have different suspension than the regular duty trucks.

But as far as dropping it go...I say go at least 2/4 maybe even 3/5 or 4/6.

[firebird_1995]

yea its coming down. im looking at a flip kit in the rear and a different key that is supposed to be good for 3".then that should have it sitting close to level. i might even check out the body mounts, they may have some sort of factory body lift on them cause i see an awful lot of frame hanging under there. there is no reason to have a jacked up 2wd

[silverado_lover]

I'd leave it as is...who expects a big truck to be fast?

[Crazy Blu]

Slaaaamm that hoe, 3/4tons look sik dropped


*and left this out of your other thread
I too recommend allen for your tune, even for your turbo... They do killer work check out silver sleepers build thread

[408.Luke]

4/7 is a good drop, and you want a good 3in difference from front to back. I dropped my rear 3'' in my duramax and it made it level lol. Also idk about the 4l80e cross member but i know the allison corssmember gets eaten up on dropped trucks because it s the lowest point under the truck