Just recently made a bracket to raise/angle the coil above the tube and use a obs cable. Tried wrapping the tube and the wire but no luck.
Just recently made a bracket to raise/angle the coil above the tube and use a obs cable. Tried wrapping the tube and the wire but no luck.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
Got a set of LPPs that I'll have off the truck soon. Includes the band clamps. 250.00 shipped. Just trying to get stock manifolds and ypipe.
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...
Just getting around to putting the motor together so if anyone has a set of longtubes laying around ill take them.
00 silverado
www.quickstreettrucks.com
I believe Cal_speed has them instock again. Also they are test fitting there new 17/8" longtubes today, so maybe ready to ship Monday.Originally Posted by LsxCody
MY TRUCK IS A HYBRID!!! IT BURNS GAS AND RUBBER....
2011 GMC CCSB
Flaco Tune, CAI, Muffler
13.8 @100
340hp 352tq
Posting Permissions
Reply With Quote
