345/30-18 on a 18x10.5" wheel

[zebra]

it is possible. i know because i have one mounted right now. that said, for me, it's very far from desirable due to having too much of a deep-dish style, so i'm in the process of trying to get a smaller tire to replace it. the tread sticks way too far out from the fender for my taste.

[sprayedenali]

uhhh... screw that!!!

[Crazy Blu]

Tbat tire on the inside look like its been thru hell and make be hard to balance maybe its the pic tho making it look lumpu

[CHEVROLADE]

What's this going on a s10 or fbody Yea that tire is mest up you need a 315 30

[zebra]

oh yeah... i should probably mention that for those not familiar with Nitto Invos, the biggest 18" tire they make is a 295/35, and that's what this was until Sat night. i must've ran over something that caused this


and likewise was running flat until i could get off the interstate & see what had caused the new slight vibration in the car. obviously, it had rode on the sidewall long enough to completely obliterate the sidewall belts & this is what happened when i tried to put enough air to get home on (i didn't know there was a hole at the time)

looking at the inboard side, you can see that as soon an i inched the car forward to check the rollability, the entire tread swelled & shifted 3" out!



so for those who still don't get the joke, i know good & well a 13.5" wide tire should NEVER be put on a 10.5" wheel... and it physically can't happen with a sidewall this short anyway.

i just thank God my stock fronts hadn't sold yet & i hadn't dismounted them either. it's what got me home. when we rolled this one away from the car, you can just hear bits of shredded crap rolling around inside the tire

[Crazy Blu]

Man thats nuts!!! Check out the goodyear ss tires they seem good...

[zebra]

these are good, too & MUCH cheaper! it just seems that for some odd reason, they apparently operate a lot better with air in them