I'm ready to get back to work on mine all I have left is to finish putting in the new harness and bolting up a few minor things and some minor wiring and it's done
I'm ready to get back to work on mine all I have left is to finish putting in the new harness and bolting up a few minor things and some minor wiring and it's done
That's about what I gotta do plus install the pedal, other than that just wait for the harness which will be here next week. I already had a tuned ecu but was for 99-02 truck so I sent that back as well that should be done by the end of next week I hope but I'll have everything else ready so when it gets here plug it up and go for a spin.
Major score today!!!!! Found I guy parting out a 03 suburban and going tomorrow to get the motor complete with harness, dbw pedal, harness and tac and everything including ac comp and lines for 200 bucks.
Bagged 03 Sierra 5.3 swap all stock with tune and vett servo.
comp cam 228/228 588int .588exh 112lsa
g80 w/3:42's
14.41@99
Originally Posted by sonnychills
wow even if the engine is trash that is a DAMN good deal.
1951 3100
1984 C10
It runs we heard it yesterday, it started right up with no problem. It does have a lot of miles but he'll of a deal for everything we got
Bagged 03 Sierra 5.3 swap all stock with tune and vett servo.
comp cam 228/228 588int .588exh 112lsa
g80 w/3:42's
14.41@99
This guy was a courier between Austin and Houston or something, hit like 13 deer and the thing was just beat to, but he cranked it over and it started right up. No lifter knock, good oil pressure, purred like a kitten, just ran a little rich. 5 hours to pull the 201k 5.3, tranny, motor harness, pedal and module, like new 145amp alt, good condition MAF and get it back to the shop. We left the tranny because it was burnt to hell, but I'm almost thinking about going back and talking him down just for the core. He only wanted $100.
Last edited by Moderator; 10-03-2011 at 01:09 PM.
After allthe wait it was the wrong harness!!! Hokkedit all up 2 days ago, didn't have my tuned ecu so didn't get very far. But today my ecu came in!!!!!! Plugged it in and on the 1st try it started right up!!! So stoked. Check engine light was on and the oil pressure gauge wasn't working, but no biggie. Buddie of mine is coming over that does tunes and is going to pull whatever time is on the Ecu and we are gonna make sure stuff is working like it should! Gonna drive ittomorrow
Bagged 03 Sierra 5.3 swap all stock with tune and vett servo.
comp cam 228/228 588int .588exh 112lsa
g80 w/3:42's
14.41@99
Posting Permissions
Reply With Quote
