T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
Towing is still an option with a stall just need to make sure and keep everything happy with a nice trans cooler. I agree with Trav on this one definitely don't like the idea of losing the purpose of the truck.
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
Last SAR race weekend i towed 1000 miles in my SSS with a 3600 stall. no problems. i had drop leafs one time and they whernt to bad. kinda bouncy but i couldnt even haul an atv without huge bottoming out issues. if your gonna spend the money replace the stock leaf and do shackles and hangers.
Slowest in Oklahoma...
My brother put the McGaughys drop leafs on his CC and the carrying capacity wasn't there. Helper bags are a requirement. I have the stock leafs off his truck, if you are interested shoot me a PM.
cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
danger_ranger83: I see now why it cost so much to get a harness made... FML
2boostedSilverado: I like Casey's rear end, I want to chat with him about it
I have a set of 3" belltech drop leaf in storage i will never use again
02 Fully forged Iron Ls1 233/239 595/603 112lsa,
milled, ported& polished heads,
K&N CAI, shorty headers,
off road x-pipe, Pypes M-80s dumped,
TCI 3600 stall ,TransGo shift kit,
True Trac w/3:73s, 4/6 drop,
and a Fast LSXRT 102
if you plan on doing anything besides cruise get something else. like has been said you cant haul anything, also since they are as soft as they are from being so flat i bet they cause some mad bunny hop at the track.
as far as towing goes you will be just fine with a stall. ive towed several things all over including through city with my truck when it had a lose 3200 in it.
its just a turbo 5.3 that a couple of kids threw together
01 silverado
09 cobalt ss
i have a set of 4" drop leaf springs on my 95 1500. havent taken it for a ride yet since im still putting the truck together but my buddy who has the same truck and did a flip kit with shackles and when he tows a trailer or even load up the bed the stock leafs bottom out and the bump stops bottom out... i figure if my suspension is too stiff id rather that over bottoming out the rear suspension and having to deal with that god awful noise and feeling when it does..
i hope to have my truck running within this month so then maybe i can come back in here and share abetter pinion on my set up.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned