Hey guys I'm hoping some of you might be able to provide me some info on my latest swap. I am going to put a 5.3 into my 92 F 150. This will be my 4th LS conversion so I'm not a total newbie, however this is the first one into a Ford. The first were 2 66 c-10's and 1 77 c10. The nice thing about swapping into an old Chevy is that I was able to buy a motor mount kit that bolted right in to the old C-10's. Obviously this isnt the case with the ford. Have any of you guys done this? If so what did you do for mounts? I could only find one old post on here for a similar swap but specifics on mounts werent mentioned. Any help or suggestions are greatly appreciated![ATTACH=CONFIG]5348
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B] The difference between winning and losing, is having a 2nd stage.
I'm doing a 1998 F150 5.3 Vortec swap. Mine originally came with a 4.2 so I don't know how much help I can offer. I made it work with BRP conversion motor mounts originally intended for an A-body LS swap. Just drilled and bolted them to the F150 A-frame. Mine is a standard trans swap so I only used the motor mounts. On their new website, they only list complete swaps. You might have to call them and see if they still sell just the motor mounts.
Reply With Quote
