Well I got bored today and compared the pinouts from a blue/red and a blue green ecu and found a few things different, not many. One a blue green ecu the blue side has a starter Enable relay (pin 39) and my harness from 99-02 doesn't have a wire there. My ecu is a blue/green but was told it was programmed to work withthe older harness.... Hmmm!!! Other differences I found was sone ac related things but I plan to pit ac in it eventually so still trading out for a 03+ harness. I'm pretty sure that my starter problem was from the block thy goes into the fuse box. Also I had to put a ns pigtail on the harness(7 wires) and 4 of them go to that block!! Which I'm assuming are in completely diff pins that an 03 truck uses. Ideally hope once I get the dbw stuff this thing will start right up. I miss driving my truck, the daily Honda just ain't doin it for me IMO