WTB C notch

[RPM Graphics]

i'll keep an eye open for you.

i think DJM also makes a bolt in notch for your truck.

[zeake]

Djm does have one, just looked it up. About 135 at stylin trucks

Thanks for keeping an eye out. I'd probably go with either of the two.

[99 lives]

I have a used set of DJM notches. Dunno what it'd cost to get'm to you tho. They dont weigh a whole bunch.

[zeake]

I have a used set of DJM notches. Dunno what it'd cost to get'm to you tho. They dont weigh a whole bunch.

Pics and what year truck were they on. 99 and 2000 model trucks have a slightly different frame. Price would be nice to. Thanks

[Endless]

This may be perfect... about 110 from summitracing...

FK2599-C 1999-2005
http://www.summitracing.com/parts/DJM-FK2599-C


Where were you finding them for 69 though?


I read bolt in is better, because the frame is tempered and heating it up messes with its integrity...

[zeake]

This may be perfect... about 110 from summitracing...
FK2599-C 1999-2005
http://www.summitracing.com/parts/DJM-FK2599-C
Where were you finding them for 69 though?

I read bolt in is better, because the frame is tempered and heating it up messes with its integrity...

They were on some website. 69 is too cheap and you usually get what you pay for. I hope that the link you posted is what 99lives has and he is willing to take a fair price for it because I prefer used as I am a cheap skate.
I would rather have the one in the link below but I refuse to pay that much.
http://www.summitracing.com/parts/BEL-6613/

[zeake]

I have a used set of DJM notches. Dunno what it'd cost to get'm to you tho. They dont weigh a whole bunch.

You are such a tease.

Pics ? How much? ? ? ? ?? ? ? ?

[AFSP1211]

I picked up a set of the DJM's as well. I just need to take some time off work to install them. Cuttign the fram kinda gives me the willy's

[zeake]

I picked up a set of the DJM's as well. I just need to take some time off work to install them. Cuttign the fram kinda gives me the willy's

Piece a cake. Follow instructions. Sawzall or torch or plasma cutter. I am looking forward to doing it to mine however . . . . .

[AFSP1211]

Piece a cake. Follow instructions. Sawzall or torch or plasma cutter. I am looking forward to doing it to mine however . . . . .

Yeah, I know I can do it. I'm just gonna read a few how to's and have to take a few days of leave to do it. Probably easiest to take the bed off to do it huh?