as long as they're not too thin of metal & you weld it up good you should be fine with just about any notch. most places sell the notches in pieces
i know mike at dallas hot rod parts sells several different size notches. suicide doors sells a few different sizes also, & Nfamus sells them already welded together & you can cut them down to the size you need.
I have seen a bunch of different ones. I just don't understand why the mcgaughys 33007 is so dam expensive compared to the 69 dollar ones.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
yeah, they're really proud of that notch, lol!!! most bolt in notches are more expensive then weld in notch's. that one is also made for the curve/bend in your year truck, where as most weld in notch's are just straight.
I would prefer the mcgaughys 33007 notch if anyone has one used. I can justify used a lot more easily to my wife.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
i'll keep an eye open for you.
i think DJM also makes a bolt in notch for your truck.
Last edited by RPM Graphics; 09-14-2011 at 04:12 PM.
Djm does have one, just looked it up. About 135 at stylin trucks
Thanks for keeping an eye out. I'd probably go with either of the two.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
I have a used set of DJM notches. Dunno what it'd cost to get'm to you tho. They dont weigh a whole bunch.
Posting Permissions
Reply With Quote
