-
Just making sure I have all parts for my swap!
Hey guy's I'm new but been browsing for a while I'm currently deployed and trying to make sure that while I'm on leave I can have all the stuff I need for my swap let me know If you can think of anything I'm missing! I have a 1978 chevy k10 scsb 44 I am doing a ls1 swap!
5.3 complete engine intake to oil pan DBW
4l80e complete
engine mount's
inline fuel pump
wiring harness
ecm
brake pedal
I believe I have it all am I missing anything?
Thank's for the help guy's
-
-
Undecided don't really need it but if it's not a big hassle then I would what's your take on it?
-
You said brake pedal, but I hope you meant accelerator pedal.
Do you have the TAC module?
-
You are gonna need the harness modded for the 4L80e and the PCM tuned for it and to eliminate VATS.
-
Awesome yes I am srry I meant the accelorator pedal I was lookin at this kit tell me what you think!
http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123
-
What year is your engine?
-
It's an 01 tahoe 5.3 l with a 4l60E drive by cable
-
Yeah, you don't need the one in the link you put up. That is for the newer GENIV engines.
You need one for a 0411 PCM.
Like this:
http://cgi.ebay.com/ebaymotors/LS1-N...item35b4021c89
Make sure the one you buy is for 00-02 DBW, not 03-07 DBW.
To use the 01 DBW TB, you have to have the TAC from a 00-02 as well, which can be kind of hard to find.
Last edited by PitchBlackC3; 07-28-2011 at 07:33 PM.
-
Well when the engine was pulled from the doner vehicle it had a crack in it so I had a chance to snag a 07 but with cable instead of drive by wire!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote