Hey guys. As some of you may know I got 6.0 swapped in my 95 a while back. But there is one thing I never finished. The gear indicator light on the dash has never worked since I hooked the new harness up and did away with the old Tranny plug. Could someone please shed some light on what I need to do to get the lights on? Thanks
Josh ----- 95 Z71 ecss -6.0 swap finished 10k miles ago, nelson tuned, built tranny, 2800 converter, 4.56s truetrac
2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
79 camaro small block street car 11.60 @ 116 (sold)
Come on guys someone can help!
2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
79 camaro small block street car 11.60 @ 116 (sold)
Can't tell you for sure bc I just finished my harness but on the 03 harenss I spliced the wire from C2 on the Parl/ Neutral switch. Which is white, gray, yellow and black and white wires to were the 97 wires went to the fire wall under the evap. I can get you the pin out if needed.
Sure if you don't mind maybe that would help! I hate wiring problems but having no indicator bugs the fire out of me. And thanks!
2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
79 camaro small block street car 11.60 @ 116 (sold)
Here you go Hope this helps.
pnp C2.jpg95 C200 con.jpg95 c200.jpg62534559.jpg
If you need the pics bigger just tell me how to because I cant figure out how.
Sry I dug this one up. Yellow and pink run from the c100 to the two trans plugs, then purple to starter. The rest of them, black white green yellow ran to the original computer. Do they need to be hooked back up?? And if so to what?
95 Chevy, bagged and bodied, LSx swap/detail in progress
Posting Permissions
Reply With Quote
