Need A/C bracket but...

[Chris]

Very nice. I think this is the answer that's going to push me over the edge and finally start my swap.

What did you have to do to your lines to make them fit? I was hoping to not even have to crack the system open, since my AC works great.

[slow600]

Had to shorten the high side line with a splice and tig on a 90 deg fitting to low side. Other than that jus make two brackets per the link and get a long serp belt.

[slow600]

heres what mine looks like, not the prettiest but works amazing.

010.JPG

this is the modded low side line

014.jpg

this is the splice i used on high side(not this exact size)

http://www.oreillyauto.com/site/c/de...0275&ppt=C0328

this is the one i used on the low side after cutting one of the ends off

http://www.oreillyauto.com/site/c/de...0275&ppt=C0328

[Chris]

You are the man. Thanks!