+ Reply to Thread
Results 1 to 4 of 4

Thread: KY_BOB Please Read

  1. #1
    Join Date
    Oct 2010
    Posts
    26

    KY_BOB Please Read

    Hey bob, Been trying contact you about yout fans.
    You do not have PM's turned on or at max capacity. Please contact me ASAP...

    Send me PM and lets get those fans in the mail.

    thanks ,

    Ezdaar

  2. #2
    Join Date
    Sep 2010
    Location
    Texas
    Posts
    2,112
    I tried to email him as you requested in the other thread and I got the same thing you're getting.

    Here is the message when you try to PM him.

    2013 EC Silverado aka redruM (Just a couple bolt ons.)
    2007 RC Silverado aka ?
    1998 Trans AM aka Red Dragon

    "Your pull your truck to the track on a trailer, I race you with a truck that pulled a trailer to the track."

  3. #3
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    I don't know what the problem is. Ive sent and recieved PM's on this board before. I've just looked at my PM box, there are some old ones in there but it isn't full. Feel free to email me at bobegbert@hotmail.com
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  4. #4
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    The PM should work now. I found the setting to allow or disable PM's an it was off. I have no clue how it got that way.
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts