+ Reply to Thread
Results 1 to 8 of 8

Thread: Flex-a-lite 282 E-fans with Nelson harness

  1. #1
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284

    Flex-a-lite 282 E-fans with Nelson harness

    FANS ARE SOLD.


    These fans and harness are between 3 and 4 years old with less than 20,000 miles on them. The worked flawlessly from the time they were installed until they were removed from 2002 Avalanche a couple of months ago. The only reason that they were removed was that I was planning on trading the truck. The Avalanche is now gone and I have no need for them.

    PLEASE READ:

    These fans will only fit trucks with 34" radiators.

    Their are some missing parts and I will represent them to the best of my knowledge. Feel free to ask any questions.

    1. I do NOT have the temp sensor and control box that came with the fans. It isn't used with the Nelson harness and I misplaced it.

    2. I was not able to get the connector out of the PCM plug and had to cut the wire. I'm sure that Allen will sell you one cheap or their may be other sources. I would think that this is a $1 or less terminal but I don't know where to point you to find one.

    3. While packing it up last night, I noticed that the main power fuse was not in the fuse holder, it's a 40-50amp fuse that can be picked up at Radio Shack or any audio store.

    4. The mounting bolts, nuts, and small hardware are not there. These can all be picked up at the local hardware store for a couple of bucks at the most.

    $325 to your door. (I think it's worth more but I want a quick sale so I can buy exhaust and/or an intake)

    I'll be shipping USPS parcel post so it could take a week to get to you unless your willing to pay the difference for something faster.

    Paypal is preferred but I will work with you.
    Attached Images
    Last edited by KY_BOB; 06-28-2011 at 05:27 PM. Reason: SOLD
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  2. #2
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  3. #3
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    All PM's will be replied to but it may be the next morning. My home computer has been on the fritz.
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  4. #4
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    Wow, I thought these would sell fast. I'll drop the price to $375 shipped. (I need that exhaust)
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  5. #5
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    $350 shipped? This setup has to be worth that.
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  6. #6
    Join Date
    Sep 2008
    Location
    Arizona/Utah
    Posts
    3,939
    Sorry its a nice setup but there are much cheaper fans available out there and most guys with 34'' rad already have efans.
    ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06

    waiting to go in... 3.90s, 214/220cam

  7. #7
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    $325 shipped. If it doesn't go for this, it's going to Ebay.
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  8. #8
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    Fans are sold!
    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts