These new set ups are reinforced flat. The older shroud type just cost too much to make. Had to revamp the build process to make it more cost effective. It also saves about 2 inches on the depth side of things.
These new set ups are reinforced flat. The older shroud type just cost too much to make. Had to revamp the build process to make it more cost effective. It also saves about 2 inches on the depth side of things.
Simply the best turbo kit for late model GM trucks.
Custom fabrication to fit your budget and needs.
Dealers for Precision, Comp. & Magnum turbos.
Online Store
[/CENTER]
man that looks good what fans are those cause they look even thiner than the ones that are on my truck
Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
EPS cam 23x/23x 600/603 112lsa
KP 6 link bagged with Accuair E-Level
http://www.nitrousexpress.com/
Yours are Spal hi performance these are not. This is about 3.5 inches thinner then your set up. What about that IC stuff whatcha figure out.
Simply the best turbo kit for late model GM trucks.
Custom fabrication to fit your budget and needs.
Dealers for Precision, Comp. & Magnum turbos.
Online Store
[/CENTER]
i think for now im going to patch the air to air and try and move it a little higher up and wait on the air to water for now so i can get caught up on things
Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
EPS cam 23x/23x 600/603 112lsa
KP 6 link bagged with Accuair E-Level
http://www.nitrousexpress.com/
Are these plug & play with the harness from Nelson?
* 2004 Chevrolet CCSB Z-71 5.3L * G80, 3.73's * Black Bear Autocal 91 oct tune * Magnaflow 3" SI/SO 14" case * Airaid M.I.T. * OEM airbox with open air modification * Color matched grille & lower valence * Blackened Tail Lights * SuperBright LEDs in brake lights & reverse lights *
In the garage to be installed: 799 heads, Dyna-Tech long tube headers, Corvette servo, 2" lowering shackles, 2wd u-bolts & bumpstops
Not sure. I don't no What plugs he uses.
So what exactly will be needed to install these on my 02 Sierra? Thx
2010 CAMARO 2SS 6 SPD Manual
2008 DENALI CREWCAB 6.2L LOADED
2005 HUMMER H2 SOLD
2002 GMC 2500HD 6.0L 4x4 ECSBSOLD
2000 Z-28 M6 TOTALED BY A ROCK Car was too low
Posting Permissions
Reply With Quote
