+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: 4l60e went boom... ideas whats wrong?

  1. #1
    Join Date
    Apr 2010
    Location
    Stigler Oklahoma
    Posts
    460

    4l60e went boom... ideas whats wrong?

    I got on the throttle to pass a truck and after i was around the truck mine shifted then went boom and would just rev up. it wont move in any gear just revs up. got any ideas on whats wrong? i havnt had any problems out of the transmission since its been rebuilt a year ago.

    thanks for any input.
    http://i817.photobucket.com/albums/zz100/madney89/jake_sig.jpg

    5.3 FBO, 224/230, 3200 circle d, 4.11s
    13.3 @ 102mph

  2. #2
    Join Date
    Aug 2007
    Posts
    754
    When that happened to me we opened it up and the rotor was shattered from the converter being pushed too far into the pump. I've also seen the dogs inside the pump break off.

  3. #3
    Join Date
    Jan 2008
    Posts
    8,031
    too much POWA

  4. #4
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    Its prolly toast hows the rearend.
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]

    The difference between winning and losing, is having a 2nd stage.

  5. #5
    Join Date
    Apr 2010
    Location
    Stigler Oklahoma
    Posts
    460
    Quote Originally Posted by LamboDoNoMo View Post
    Its prolly toast hows the rearend.
    i hope its not too expensive ha. rear end is still okay. be way better with some 3.90s and tru trac
    Quote Originally Posted by STUNNA View Post
    too much POWA
    +1 lol
    http://i817.photobucket.com/albums/zz100/madney89/jake_sig.jpg

    5.3 FBO, 224/230, 3200 circle d, 4.11s
    13.3 @ 102mph

  6. #6
    Join Date
    Apr 2010
    Location
    Stigler Oklahoma
    Posts
    460
    Quote Originally Posted by emmerich5.3 View Post
    When that happened to me we opened it up and the rotor was shattered from the converter being pushed too far into the pump. I've also seen the dogs inside the pump break off.
    what all had to be done to fix it?
    http://i817.photobucket.com/albums/zz100/madney89/jake_sig.jpg

    5.3 FBO, 224/230, 3200 circle d, 4.11s
    13.3 @ 102mph

  7. #7
    Join Date
    Aug 2007
    Posts
    754
    Quote Originally Posted by jakedewey View Post
    what all had to be done to fix it?
    Luckily was able to salvage the pump. Needed a 3-4 clutch pack if that sounds right and a new rotor. I think it's a 13 vein.

  8. #8
    Join Date
    Mar 2010
    Location
    Paris, TX
    Posts
    511
    I have some good used 13 vane rotors if you want one. Just pay me the shipping.

  9. #9
    +1 on the pump, same thing happened too me

  10. #10
    Join Date
    Sep 2006
    Location
    Coon Rapids, MN
    Posts
    1,219
    you might have snaped ur input shaft. had that happen 3 times in my 02 silvy. went to pass a guy and BANG no more go. does it still move in park?

    04 Grand Prix GTP
    03 Z71 wanting a Turbo ,Stall, and Tune BAD
    THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts