4.8 swap?

[Frenchy]

No it's impossible. It'll be easier to just sell it and find something with a 6.0.

[william42]

nothings impossible....and ive read about alot of people doing this swap, i just havent found all the answers i need yet. any information is appreciated.

thanks

[Frenchy]

It's called sarcasm. Look around the site, use the magical search function.

[william42]

i see. haha well im learning i guess. anything you could possible help me with that might be hard to find?
thanks

[william42]

what year model 6.0 do i need to look for and do i have to use my intake, fuel rails, and injectors off of my 4.8 or do i use the 6.0 stuff? and will all of my front accesories work on the 6.0? which flexplate do i need to use to bolt the 6.0 to my tranny? whatabout the tb which one do i use?
i know someone can answer these for me?

[EmmerichLSx]

I'm not sure why he is being a dick Any year will work. All the accesories will work. The differences will be whether the tb is drive by wire or cable, and whether the 6.0 you get has return style or returnless style fuel rails. And you'll need a 6.0 flex plate.

[EmmerichLSx]

So if those things are different just take your intake, rails, and tb off the 4.8, get new intake gaskets and put it on the 6.0.

[PitchBlackC3]

I'm not sure why he is being a dick Any year will work. All the accesories will work. The differences will be whether the tb is drive by wire or cable, and whether the 6.0 you get has return style or returnless style fuel rails. And you'll need a 6.0 flex plate.

He's not being a dick, this question is just asked and answered every day.
And no, every year won't work. The long shaft 99-00 LQ4 won't work with a 4L60e.
OP, all you need is a 01-06 longblock. All your accessories and intake, injectors, TB etc. will fit. PCM is the same, just get a tune.
Seriously though, hit up the search button and most if not all of your questions will be answered.