whos tune?
walboro or stock? sometimes with walboros you need to cycle key first before firing as not all of them have check valves
whos tune?
walboro or stock? sometimes with walboros you need to cycle key first before firing as not all of them have check valves
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
i have a 05 65 e with 6.0 and sd tune, did the same thing till i put a transgo hd 2 kit in valve body or u can just put the po 1870 eliminator kit in the luckup so when it goes in its 100% lockup, what ur feeling is the lockup slowely going from 30% on up , if not fixed it will throw a trns slipe code
Nelson's tune. Walbro. I always cycle the key before I start it. It's got good fuel pressure when cranking.
Sounds like it may need this po 1870 kit. I'll search it.
So it looks to me like what you're talking about is a new TCC solinoid. I don't even care If I just have a lockup switch inside the cab. Can someone tell me how to do that?Originally Posted by LQ9_Z71
Last edited by EmmerichLSx; 04-25-2011 at 04:18 PM.
Post Ur mods. Could be a couple different things. As for the tcc, we can try to increase a table.
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Iron LS1, 9.5:1, 4" CAI, stock MAF, stock 5.3 heads, stock intake, LT's, ORY, comp xr257hr, 48# injectors, single walbro 255, -8 feed, -6 return, did the fuel lines for when it had a turbo.
My truck did exact same thing as far was the stall acting funny and rpms boucin... on my old tune... Allen got me all fixed up now tho...
Posting Permissions
Reply With Quote
