want 90 rcsb 5.3 swap into the 13's on the cheap any ideas?

[guywith91s10]

I have a 90 rcsb with a 5.3 4l60e swap, mods are cai, cat delete, tru duals, tune. I have a 3.08 peg leg rear end in the truck and scale 3900 with driver. I have a slip for 14.6 @ 96 with a 2.3 60' and a 9.5 1/8 @76. Tires are 235/75/15 goodyear wranglers lol on steelie dans. I need to run better than a 14.1 to beat a buddies srt 4 neon thats his best time any ideas? I was thinking e-fans, 4.10 posi and bump timing a bit will that be enough?!?!?!?!?

[chvy=power]

ls6 cam (most pick one up for usually like a hundred bucks) would be great in that light truck, gears and a posi. And you should blow his doors off . E fans dont make much diff in my opinion just spend the money on a cam

[pl4yboy]

3.08 is killing you off the line. A set of 4.10s might pick you up .3-.5. That and a 3000 stall and you'd be running high 13s.

[guywith91s10]

3.08 is killing you off the line. A set of 4.10s might pick you up .3-.5. That and a 3000 stall and you'd be running high 13s.

Getting the 4:10's in today and a quote for a stall vette servos and a shift kit. I want to see what the gears do before I do the tranny.

[NAREJEPP]

ls6 cam (most pick one up for usually like a hundred bucks) would be great in that light truck, gears and a posi. And you should blow his doors off .

i like this idea too. you get a better "cool factor" from a cam!

[pl4yboy]

Getting the 4:10's in today and a quote for a stall vette servos and a shift kit. I want to see what the gears do before I do the tranny.

You did get a locker as well right?

[country_3030]

4:10's in that truck without a locker is going to be boiling one tire!

[guywith91s10]

i like this idea too. you get a better "cool factor" from a cam!

I'm nervous about a cam after last weekend, I get to the track and my first run is aginst a 2000 ish rcsb 2wd. I ask him what he's got and he smirks (I get this alot because nobody suspects a LS swap ). He's got a 6.0 swap with a cam 2500 stall built trans with a shift kit and a 3.73 posi. I think crap this guys going to kill me...right? He gets me to the 60 and I pass him at the 1/8 th and beat him by .4 and trap 96 to his 91, I never saw him run better than a 15.0 all night and he had a 2.0 60. He did scale 600 lbs more than me but still or maybe it was his diablo sport handheld tuner idk but he should have beat me. Said he had a 224 lift cam? Why was he so slow I have a stock 5.3 stock tranny and had 3.08's I do have a tune but man I don't know.

[guywith91s10]

[QUOTE=country_3030;432130]4:10's in that truck without a locker is going to be boiling one tire![/QUOTE

Waiting on a posi not sure what direction I want to go yet, the problem is I drive this in the winter and posi is not great on a icy road. I might get a mini spool and just put it in for track time....

[NAREJEPP]

I'm nervous about a cam after last weekend, I get to the track and my first run is aginst a 2000 ish rcsb 2wd. I ask him what he's got and he smirks (I get this alot because nobody suspects a LS swap ). He's got a 6.0 swap with a cam 2500 stall built trans with a shift kit and a 3.73 posi. I think crap this guys going to kill me...right? He gets me to the 60 and I pass him at the 1/8 th and beat him by .4 and trap 96 to his 91, I never saw him run better than a 15.0 all night and he had a 2.0 60. He did scale 600 lbs more than me but still or maybe it was his diablo sport handheld tuner idk but he should have beat me. Said he had a 224 lift cam? Why was he so slow I have a stock 5.3 stock tranny and had 3.08's I do have a tune but man I don't know.

yea, i don't know on that one. i just know that most of these ls motors will respond well to a cam swap. even with the stock heads. i read an article a while back about a stock 5.3 getting a 75 hp boost with a cam swap only. i don't know if anyone has seen this kind of gain in real life, i haven't, and i'm sure the article was featuring a pretty heavy cam, but nonetheless...