Can I run a Pro Charger with my cam?

[jetmech]

Listen up cam expert ...... he has boost but it IS NOT a turbo....... So overlap is fine as long as he has enough blower/pulley to make boost .. My shop truck has a EPP blower cam... 232/240 115 600 600 or so.. And it makes over 620 on a mustang dyno on 10psi ....... 2004 LT Ex cab 2wd 5.7L 4l60 10psi and full weight truck..... 11.50-11.70 in the heat on pump gas and NO meth.... I think there are better cams then the ASA cam... but if you own it already then use it.... I like 4-6 degree split with a blower

Whoa, whoa buddy I was just throwing my opinion out there. I'm no expert Mr. camshaft Now go put that white thing of yours back together

[Botlfed]

Whoa, whoa buddy I was just throwing my opinion out there. I'm no expert Mr. camshaft Now go put that white thing of yours back together

mine has 3 degrees of overlap no wonder my nitrous is all fugged up

[jetmech]

no wonder my nitrous is all fugged up

Or maybe it's operator error

[Botlfed]

Or maybe it's operator error

That was my 1st thought