Originally Posted by pl4yboy A different shifter cable should do the trick. There is no cable...its all hard linkage... Originally Posted by lechez71 i had no problem, im using the stock shifter in the column to shift the 60e tranny in my 82 c10 You were able to use the factory linkage? or did you get a kit from somewhere? How does the indicator on the column work with the 4 speed?
Is the indicator electronic or just fluorescent bars? U can use the stock mechanical linkage. We've done a few conversions works fine.
Nelson Performance FastestTruckList.com NP on Facebook Youtube Channel '94 Chevy Truck: 8.9 et, 408 twins
Forum Rules