+ Reply to Thread
Results 1 to 10 of 13

Thread: Can I run a Pro Charger with my cam?

Hybrid View

  1. 03-23-2011 01:22 PM #1
    jetmech's Avatar
    jetmech
    jetmech is offline The Brown Guy
    Join Date
    Jul 2008
    Location
    The Garage
    Posts
    1,330
    Quote Originally Posted by mrfister View Post
    This link said my cam has an overlap of 11.00
    Personally, I wouldn't use that cam with boost if it has 11* of overlap, but that's just me. Cam usage, selection, and preference is a VERY divided topic so you will hear many different suggestions when it comes to cams. My cam specs are:

    580/580
    220/222
    114 LSA

    Just to give you an idea of what I believe is a decent boost cam. Hope this helps

    ~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
    Reply With Quote Reply With Quote
  2. 03-23-2011 04:38 PM #2
    mrfister's Avatar
    mrfister
    mrfister is offline Member
    Send a message via MSN to mrfister
    Join Date
    Jun 2010
    Location
    norman,ok
    Posts
    90
    That's what I thought about the cam, so I'll just wait 'til I stuff in the bigger cubes.
    Thanks.
    Reply With Quote Reply With Quote
  3. 04-07-2011 02:12 PM #3
    casey23 Guest

    camshaft

    Listen up cam expert ...... he has boost but it IS NOT a turbo....... So overlap is fine as long as he has enough blower/pulley to make boost .. My shop truck has a EPP blower cam... 232/240 115 600 600 or so.. And it makes over 620 on a mustang dyno on 10psi ....... 2004 LT Ex cab 2wd 5.7L 4l60 10psi and full weight truck..... 11.50-11.70 in the heat on pump gas and NO meth.... I think there are better cams then the ASA cam... but if you own it already then use it.... I like 4-6 degree split with a blower
    Reply With Quote Reply With Quote
  4. 04-07-2011 02:55 PM #4
    jetmech's Avatar
    jetmech
    jetmech is offline The Brown Guy
    Join Date
    Jul 2008
    Location
    The Garage
    Posts
    1,330
    Quote Originally Posted by casey23 View Post
    Listen up cam expert ...... he has boost but it IS NOT a turbo....... So overlap is fine as long as he has enough blower/pulley to make boost .. My shop truck has a EPP blower cam... 232/240 115 600 600 or so.. And it makes over 620 on a mustang dyno on 10psi ....... 2004 LT Ex cab 2wd 5.7L 4l60 10psi and full weight truck..... 11.50-11.70 in the heat on pump gas and NO meth.... I think there are better cams then the ASA cam... but if you own it already then use it.... I like 4-6 degree split with a blower
    Whoa, whoa buddy I was just throwing my opinion out there. I'm no expert Mr. camshaft Now go put that white thing of yours back together

    ~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
    Reply With Quote Reply With Quote
  5. 04-07-2011 04:58 PM #5
    Botlfed's Avatar
    Botlfed
    Botlfed is offline They see me rollin'
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    Quote Originally Posted by jetmech View Post
    Whoa, whoa buddy I was just throwing my opinion out there. I'm no expert Mr. camshaft Now go put that white thing of yours back together
    mine has 3 degrees of overlap no wonder my nitrous is all fugged up
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]
    The difference between winning and losing, is having a 2nd stage.
    Reply With Quote Reply With Quote
  6. 04-07-2011 07:08 PM #6
    jetmech's Avatar
    jetmech
    jetmech is offline The Brown Guy
    Join Date
    Jul 2008
    Location
    The Garage
    Posts
    1,330
    Quote Originally Posted by LamboDoNoMo View Post
    no wonder my nitrous is all fugged up
    Or maybe it's operator error

    ~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
    Reply With Quote Reply With Quote
  7. 04-07-2011 10:27 PM #7
    Botlfed's Avatar
    Botlfed
    Botlfed is offline They see me rollin'
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    Quote Originally Posted by jetmech View Post
    Or maybe it's operator error
    That was my 1st thought
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]
    The difference between winning and losing, is having a 2nd stage.
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules