I would be scared to snap that idle pulley off tho. But if it works then.........
I would also be afraid that I would snap off the idler pulley. It might work better using the p/s pulley but I think I will try the chain to the frame method
Chain works perfect every time.
ratchet strap from the balancer then to a support beam above motor or the fender worked for me
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
remove your starter and then stick a big screwdriver through a hole in your flexplate and turn engine by hand untill screwdriver gets wedged, worked for me.
99 silverado 2500 4x4 ec lb, lq4 with 243 heads, pace setter long tubes, true duals with x pipe and bullet mufflers, comp 222 224 112 cam, 8.1 truck injectors, 4l80e with 2800 stall, 373 gears, 285 75 16 tires, efi live tune in progress, 350rwhp 360tq, 11.8 average mpg mixed driving
I think on Travis's truck we just threw a breaker bar threw it and that was it. Don't remember how we angled it though
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
Posting Permissions
Reply With Quote
