No. My truck leaves hard on 7psi launch and the front end raises and it dont light them up but will spin a little. thats why i said if your making 500 or less. My truck is making well over that. Im going to 80e also and they dont make a 32 spline input for this case or i would keep it.
2002 RCSB Z71, 409 with stock heads, custom spec cam, vic jr intake, t-76 Q-trim front mount, Tim Frost 4l80e trans, eaton posi, and the list goes on.
You need a 149 and so do I. You have the same one that is stock on my 2003.
Im just gonna go with a NP243 behind my 80.
Bump bump
bump again for a great seller
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Theres a guy that sells the adapter for the 80e to the awd t-case over on SSS.com. less than $400 i believeOriginally Posted by bluchevypick
Slowest in Oklahoma...
Way more than i want to spend when i already have a case that will work.
bump bump
I guess I don't see the point in using the BW case without the stock ABS system doing traction control duty. Seems like now you are able to lose traction at 4 wheels instead of just 2.
Well like stated above.....I have been running a 6.0 boosting 7psi and not having a problem with it. matter of fact here is a video with me launching under boost. You can hear the front tires barely spin.
http://www.youtube.com/watch?v=G9TfPY1qhF0
Posting Permissions
Reply With Quote
