NNBS TPMS Relearn
I saw Greg posted in a for-sale thread about doing the relearn for TPMS sensors for NNBS trucks. Here's the procedure, hope it helps someone:
-Take valve stem caps off (procedure goes quick, better to have them off prior to starting)
-Turn key to ON position but don't start
-Press the lock and unlock button on your key fob until your horn honks ONCE (those of you without remotes can access this by using the DIC info button)
-Go to drivers side front tire and let out air for 5-15 secs until your horn honks ONCE
-Go to passenger side front tire and let out air for 5-15 secs until your horn honks ONCE
-Go to passenger side rear tire and let out air for 5-15 secs until your horn honks ONCE
-Go to your driver side rear tire and let out air for 5-15 secs until your horn honks TWICE
-After the horn honks twice, the relearn is done.
-Check tire pressures and reset to desired pressure
-Reinstall valve stem caps
Last edited by bartjo06; 02-07-2011 at 11:04 PM.
2001 GMC Sierra SL ECSB - Project
2012 Honda Civic Si - DD
2009 GMC Sierra SLT ECSB - Sold
Reply With Quote