Originally Posted by
Bigschwerm
Sounds good man. I just picked up this cam to run in 5.3 along with some P/P Milled 243 heads and TBSS Intake until next fall when I get my LQ9 finished and ready to install.
How do you like the cam so far with the 2800 stall?
I have no regrets on cam choice or stall for my application. If I had a lighter truck and wasnt going to tow anything I would get a better stall. I have the 2800 from patc and it is virtually the same weight and dimentional size as stock. In your truck id recommend somthing more like a circle d 3000, or yank, somthing smaller in size and lighter. But as far as stall rpm I think 2800- 3000 is plenty for this cam. I think peak torque was around 4600 4800 and was really flat. Peak hp at 5800.
99 silverado 2500 4x4 ec lb, lq4 with 243 heads, pace setter long tubes, true duals with x pipe and bullet mufflers, comp 222 224 112 cam, 8.1 truck injectors, 4l80e with 2800 stall, 373 gears, 285 75 16 tires, efi live tune in progress, 350rwhp 360tq, 11.8 average mpg mixed driving
Reply With Quote