WTT 7.4 pushrods for 7.425

[danger_ranger83]

Stock is 7.4, but I'm confused. If you're shaving your heads, you'd want something like 7.38....

I was thinking the same thing but my math isn't very good lol

[oleshifty]

unless you're going with a thicker then stock gasket...or are putting an odd cam in there, you shouldn't need LONGER.

MidwestSS's cam called for 7.4s and if I believe there was actually a little too much pressure on them. I'm not sure what size he used/still has (he had a couple sets laying around). I am using 7.35's on mine, because my heads were shaved a little. They are probably still a little too long, but the lifters can eat some.

[Frenchy]

Yeah I dunno, 7.425's is what was recommended but makes no sense, I was in a daze apparently. Just have to measure for sure when the time comes.

[bangbangskeetskeet]

I've got brand new in box Comp 7.425's that thunder wouldn't take back or exchange for 7.4's. They are still sealed in tge plastic wrap from comp.