its orange with a black stripe.Originally Posted by RedHeartbeat
It doesnt go to the transfer case, that would be in the engine harness. This start at the PCM but goes to a connector under where the factory fuse block would be. Within 12 inches of the PCM. I could get a pic of the connector if it would help.
BTW this is a 2wd harness. my truck has floor shift 4wd, Im not using any 4wd stuff in the harness. Just the one speed sensor at the back of the transfer case I will hook into the harness.
Im also doing a 06 cluster in it. Theres a few vehicle speed signal pins on the pcm, 49 and 50 on the green connector. Not sure what to use for the gauge cluster.
Reply With Quote