4l80e swap question yoke driveshaft

[kawikid]

Iam doing an LQ4/4l80e swap in my 95 CCSB C1500. I have everything ready except for my headers and driveshaft. The 4l80E I bought does not have a yoke on it, can I use my old yoke on my 4l60e tranny. Another question is do I have to get shorter driveshafts? or can I use the ones for my 4l60e? If I have to get new ones can I get a driveshaft on a OBS CC 3500? My old tranny is an LT my new tranny is an LS tranny?

[banker099]

you will need a short shaft turbo 400 yoke

[kawikid]

http://cgi.ebay.com/ebaymotors/NEW-D...Q5fAccessories

Something like this?


Or this

http://www.riversidegear.com/categor...oduct-431.html

What constitutes short?

[banker099]

the bottom one is the right one, not sure about the top one

[kawikid]

Thanks for the info will I need a new drive shaft with this still? Or will I have to get a one out of the Crew cab 3500?

[banker099]

u can have the yoke put on your driveshaft, the 80e is only 1/4in longer than the 60e, the mount is in a different place is the only reason you have to move the crossmember...