+ Reply to Thread
Results 1 to 3 of 3

Thread: 4 x 4 cam

  1. 09-23-2010 11:17 PM #1
    Next Level
    Next Level is offline Just Time and Money
    Join Date
    Nov 2009
    Location
    Indy
    Posts
    43

    4 x 4 cam

    I need some help picking a cam, I like what everyone has to say about the 212 218 low lift comp.., but was maybe wanting a little more lope and I'm kind of thinking the 113 lsa of the Lunati Voodoo cam would make that happen. Is it even going to make any difference? I plan on staying N/A. Would the lobe profiles on one or the other be quieter or easier on the valve train. Or maybe even the 265 lsr cam from comp, spend another 100 bucks on springs to handle the lift. Does anyone have experience with this cam in a 4x4, comp says its for low rpm use, but also rates it up to 6500 rpm. I wonder how the drivability would be compared to the other two.

    Voodoo specs:
    212 218
    .531 .531 lift
    113 lsa

    Comp low lift:
    212 218
    .522 .529 lift
    114 lsa

    Comp 265 LSR
    215 233
    .6204 .610
    112 lsa
    2004 GMC Seirra 1500: 3" Body lift, 295/75 Nitto Terra Grapler's on Stone Crushers, cam keys, Bilstein 5100, 5.3 liter, K&N 77, Stainless longtubes, Banks Monster Exhaust, Nelson Performance 93 tune, 2600 stall, Ls1 fans, Taylor wires, NGK tr55's, TransGo shift kit, Corvette servo, TCI pan, 4.10 G80 w/ TA Performance, Optima
    Reply With Quote Reply With Quote
  2. 09-24-2010 04:31 PM #2
    Duct_tape123
    Duct_tape123 is offline The Man
    Join Date
    Jan 2009
    Location
    Round Rock, Texas
    Posts
    1,699
    I've heard good things about the LSr cam. There is a guy on youtube that has the LSr in a 5.3 and it sounds pretty good. TruckinL33 has desktop dyno and ran that cam in a 5.3 and said it made stupid torque at 2000 rpm. Definitely worth the extra money for springs.
    cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
    danger_ranger83: I see now why it cost so much to get a harness made... FML
    2boostedSilverado: I like Casey's rear end, I want to chat with him about it
    Reply With Quote Reply With Quote
  3. 09-27-2010 03:04 PM #3
    Next Level
    Next Level is offline Just Time and Money
    Join Date
    Nov 2009
    Location
    Indy
    Posts
    43
    What about the Vinci ultra torque???? Anyone running that cam?
    2004 GMC Seirra 1500: 3" Body lift, 295/75 Nitto Terra Grapler's on Stone Crushers, cam keys, Bilstein 5100, 5.3 liter, K&N 77, Stainless longtubes, Banks Monster Exhaust, Nelson Performance 93 tune, 2600 stall, Ls1 fans, Taylor wires, NGK tr55's, TransGo shift kit, Corvette servo, TCI pan, 4.10 G80 w/ TA Performance, Optima
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules