also, you run a Josh Powers custom A/C bracket, itll allow you to run your factory 88-98 A/C

im running a stock crank pulley, Truck Acc, my AC pump. i used 2 idler pullies bc i didnt have access to the right belt at the time. i used my 4.3 tensioner pulley (its a smooth pulley) next to the AC pulley, i then bought another idler pulley for an 04 5.3 to use on my tensioner by the water pump with a 1090K6 it works perfect. i still have to mill down my spacer bc its off by an 1/8"

sorry dont mean to clutter the thread, just explaining what i used on my 94